[. . . ] Keep the manual and the product information in a safe place for Future reference or for the next owner. Do not use the ac- Please read the information on intended use to ensure that you use the accessories correctly and safely. Only use the accessories: ¡ with a food processor from the same series MUM5. Only attach and remove accessories once the drive has Stopped and the appliance has been unplugged. [. . . ] A new disc holder is available from customer service under order number 00630760. Before using for the first time Before using for the first time Prepare the base unit and the accessories for use. Preparing the base unit Note: The food processor shown in the pictures may differ from your model in terms of shape and features. Press the release button and push the swivel arm down until it engages in position 1. Press down the protective cover for drive 2 at the marking and remove. Before using for the first timeen Assembling the continuous feed shredder wARNING Risk of cutting!Never touch the sharp blades and Never assemble the accessories Grip the disc holder level with the wings. Take hold of the required cutting disc by the edge and fit onto the disc holder with the side you require facing up. Fitting continuous feed shredder onto the base unit Ies once the drive has stopped and the appliance has been unplugged. Push the continuous feed shredder down and rotate clockwise until it engages. 14 The continuous feed shredder must be securely connected to the base unit. You can find out everything you need to know about operating your accessory here. Note: Your model is equipped with a 4- or 7-level rotary switch depending on the features of the appliance. The recommended speeds for the 4-level rotary switch are always shown in brackets in these instructions for use. Processing food with the continuous feed shredder Do not reach into the filling shaft. The accessories should only be used in the intended operating Note: The continuous feed shredder can only be used if the bowl is fitted properly. Cut large items of food into pieces so they fit into the filling shaft. Insert the food into the filling shaft and press down with the pusher, The food in the bowl almost reaches the outlet opening of the continuous shredder. Tip: You can empty the bowl during processing without removing the continuous feed shredder. Removing the continuous feed shredder Ies once the drive has stopped and the appliance has been unplugged. [. . . ] Cutting disc does not rotate Lid is not fitted and engaged Check whether the lid is fitted prop- Although the base unit is run- properly. "Assembling the continuous feed Accessory has been overloaded and the disc holder shaft has broken at the predetermined breaking point. You can order a new disc holder from customer service under order number 00630760. Register your new device on MyBosch now and profit directly from: Free and easy registration ­ also on mobile phones: www. [. . . ]